Metal Warehouse Storage Drive in Racking System Loading Capacity
What are the advantages of our company?
1. Dongguan Smaco is a qualified storage rack manufacturer in China
which has ISO 9001-2000 certificate.
2. We are the most patient sales who are willing to listen to your
concern and suggest the best proposal.
3. we can send a cut of samples for your reference by express.
However we can help you to save a lot of express fee, for we have
good long cooperated express agent.
4. Our Safety Design
5. We pay very much attention to the export packages.
6. We will send you information and photos at different production
stage of your order. You will get the latest information.
7. For general orders, we promise to produce within 20 days.
1. Also known as "into racking type shelf" corridors. This is a not
to channel segmentation, continuity of the whole building racking.
In the longitudinal direction, tray deposited, based on depth,
which makes a followed a high-density storage possible. Goods from
the shelves of the unified access, "after be being put first
measured with take after take,". The balance weight and moved
forward type forklift may easily among access goods into shelves
2. Into racking investment relatively low cost, use and transverse
dimensions of bigger, quantity and variety, have less access mode
can be scheduled goods, commonly used to store large quantities of
the same kind of goods. Because of its storage density of ground
space utilization, such as higher, commonly used in the
refrigerator storage space where high cost
Features with specification :
1. All racking shall be fixed onto the ground by means of Expansion
2. Each beam is secured by 2 safety pins
3. Apperance is the Electro Static Dusting Spray
4.The layer can be steel plate , wood plate or steel pallet
5. Protector is recommended to mount in the junction of over two
1. Easy assemble and disassemble;
2. 75mm can be freely adjusted for beam
3. Can highly improve storage space
4. Units can be connected to limitless lengths according to site
|Loading Capacity /layer|
Usually from 500kg to 5000kg
Also can design according your requirement
|Specification of rack||Length||From 1500mm to 3900mm|
|Depth||From 800mm to 1800mm|
|Height||From 1800mm to 12000mm|
|Note: Also can design and produce according to your special
Drive in Rack Detail for Reference